The ODM multifunctional dust collectors

Share

We offer two types of ODM collectors: ODM-P with pleaded filter cartridges (called ‘patrons’) and ODM-K with cassette filter cartridges – in both cases the cartridges are produced of high quality filter fabrics.

The ODM dust collectors are also available in ATEX compliant versions.

Znak strefy EX

Structure

The ODM dust collectors are of modular structure and are produced of panels that are bolted together with the use of connectors. In the connections there are additional bendings, which work as structural reinforcing ribs both horizontally and vertically. The base of the dust collector consists of posts and cross-beams made of half-open C-channel sections. The whole structure is produced of continuously galvanized and cold formed carbon steel sheets. The dust collector is produced of standardized filter modules that can be combined together and this way it is possible to extend the filter by additional modules. Such solution increases efficiency of a dust collector.

How does our ODM dust collector work?

Zasada działania odpylacza modułowego, kasetowego, z wkładami, filtrami patronowymi, Filtorwent, odpylanie przemysłowe, odpylacz do spawalni
  1. Dirty air inlet
  2. Filter cartridges (pleaded or cassette)
  3. Hopper
  4. Clean air collective duct
  5. Cleaned air outlet
  6. Compressed air collector
  7. Explosion vents /ATEX/

Dust collector emptying methods:

  • directly into containers
  • with the use of an additionally connected rotary valve
  • with the use of a screw conveyor and a rotary valve

Methods of filter cartridges cleaning

ODM dust collectors are available with an automatic cleaning function (that is cleaning during filter operation) – with the use of compressed air.
The number and frequency of the cleaning process depends on dust type and the filter load. The cleaning is run by a programmed electric controller. As an option, the cleaning process can take place depending on the measured pressure difference and in case when the pressure exceeds a set limit, the cleaning porcess is initiated.

Filter cartridges:

  • ODM-K25 – filter cassettes
  • ODM-P200 – pleaded filter cartrides

Filter cassettes of K25 type:

  • solid and compact structure
  • big filtration surface
  • easy mounting and maintenance
  • very high filtration efficiency
  • individual choice of the filtration material for the cassettes
  • available models:
    • 4 rows per cassette (filtration surface ca. 7 m2/cassette)
    • 6 rows per cassette (filtration surface ca. 10,5 m2/cassette)
Odpylacz filtracyjny, kasetowy
Cassette filter cartridges
Filter cassette typeBasis weightMaterialTemperature resistance
[C]
Acid resistance Alcalic resistanceHydrolysis ressitance
POL/STD500 g/m2polyester (standard)150goodvery lownone
COATED550 g/m2PTFE coated150goodvery lownone
POL/AS500 g/m2antistatic polyesther150goodvery lownone
POL/PTFE550 g/m2PTFE membrane150limitedlownone
POL/SPAW550 g/m2polyester, micro unwoven fabric150goodmediumvery low
Types of available filter cassettes

ODM-K dust collector type
Number of filter cassettesFiltration surface
[m2]
Max. efficiency of ODM-K dust collector
[m3/h]
ODM-K25/02/062212.520
ODM-K25/04/064425.040
ODM-K25/06/066637.560
ODM-K25/08/0688410.080
ODM-K25/10/061010512.600
ODM-K25/12/061212615.120
ODM-K25/14/061414717.640
ODM-K25/16/061616820.160
ODM-K25/18/061818922.680
ODM-K25/20/062021025.200
Model/size of ODM-K dust collectors with basic parameters

Pleaded filter cartridges of P200 type
Pleated filter cartridges are commonly used in dedusting technology. As a rule the working side is on the outside of the cartridges (this is where dust settles).
Depending on the type of dust, there are different materials the pleaded cartridges are produced of: paper or plastic unwoven fabrics, or needled unwoven fabrics. The filter materials are produced according to quality control requirements and are admitted to use as elements which provide filtered air back to the work stands.

Odpylacz filtracyjny z patronami
Pleaded filter cartridges
Pleaded filter cartridge type MaterialAir permeability
[m3/m2/h at 200 Pa]
Filtration class
POLYESTHERpolyesther (standard)470M
NANOpolyesther, micro unwoven fabric180M
COATEDcoted PTFE410M
PTFEPTFE membrane288M
Types of available pleaded filter cartridges
Note: for dust collectors with ATEX compliance, the material of the filter cartridges is additionally coated with antistatic layer.
ODM-P dust collector typeFilter cartridge height Number of cartridgesFiltrating surface
[m2]
Max. efficiency of ODM-P dust collector
[m3/h]
ODM-P200/02900835,23.520
1200847,24.720
1500858,45.840
ODM-P200/049001670,47.040
12001694,49.440
150016116,811.680
ODM-P200/0690024105,610.560
120024141,614.160
150024175,217.520
ODM-P200/0890032140,814.080
120032188,818.880
150032233,623.360
ODM-P200/109004017617.600
12004023623.600
15004029229.200
ODM-P200/1290048211,221.120
120048283,228.320
150048350,435.040
ODM-P200/1490056246,424.640
120056330,433.040
150056408,840.880
ODM-P200/1690064281,628.160
120064377,637.760
150064467,246.720
ODM-P200/1890072316,831.680
120072424,842.480
150072525,652.560
ODM-P200/209008035235.200
12008047247.200
15008058458.400
Model/size/ODM-P dust collector type with basic parameters